Trauma

Werkomed (Pty) Ltd. is proud to be a distributor of trauma products in South Africa.


About ORTHOPAEDIC TRAUMA

Benefits of orthopaedica trauma

Werkomed (Pty) Ltd has partnered with several high-quality Orthopaedic companies around the world in order to provide its customers with the best available product options for their patient needs.

We remain committed to our promise to be INNOVATORS IN MEDICAL CARE.

We focus on providing orthopaedic solutions that improve patient care; whilst at the same time maintaining our values of delivering product innovation alongside top-quality service to each customer.

UPPER LIMB
Clavicle Locking Plates System
The Locking Clavicle Plate System is a proven osteosynthesis system for various clavicle fractures.   Properties of the implant: Multi-directional Locking Anatomical plate design   Medial Clavicle Plate: Turn 180° for right and left version Plate lengths: 6, 8, 10-hole Plate thicknesses: 2.5mm and 3.5mm   Lateral Clavicle Plate: Left/right version Plate length: 4-hole, Plate […]
Proximal Humerus Locking Plate
The newly developed Proximal Humerus Locking Plate enables the medical treatment of fractures in the joint area as well as periprosthetic fractures with an optional less invasive method.   Properties of the implant: Multi-directional locking Anatomical plate design 6 proximal screw holes for optimal reconstruction of the humeral head Oblong hole for optimal positioning and […]
Large Fragment Midshaft Plate
ITS provides various Straight Locking Plates with different plate strengths and lengths covering a wide range of indications for shaft fractures.   Properties of the implant: Multi-directional Locking Anatomical plate design Accurate fitting of the plate on the bone Plate lengths, 3.5/4.5mm: 5, 6, 7, 8, 9, 10, 11, 12, 13-hole Straight Plate 3.5/4.5mm: Fracture […]
Distal Humerus Locking Plates
The Distal Humeral Locking Plates are a proven osteosynthesis system for various fractures of the distal humerus.   Properties of the implant: Multi-directional Locking Anatomical plate design Sliding hole with a compression option of up to 4mm Pointed proximal plate end for percutaneous insertion Left/right version Lengths – dorsolateral: 4, 5, 6, 7-hole Lengths – […]
Olecranon Locking Plates System
The primary advantage of the Locking Olecranon Plates lie in early functional postoperative treatment. Conventional fracture treatment with tension bands and subsequent immobilization can lead to heterotopic ossifications and subsequent limited mobility in the elbow.   Properties of the implant:  Multi-directional Locking Anatomically contoured Optimal reconstruction of the joint surface Simple positioning due to sliding […]
Universal Anatomical Forearm
The Universal Forearm Locking Plates System is an osteosynthesis system for various forearm shaft fractures.   Properties of the implant: Multi-directional Locking Low-profile design Free choice of plate position (volar, dorsal, radial, ulnar) Straight and curved version adapted to the forearm anatomy Plate lengths: 6, 9, 11-hole Plate strength straight: 3.0mm Plate strength curved: 3.5mm […]
Straight Compression Locking Plate
The special feature of this implant is its compression hole. Due to an innovative technology, it is possible to compress a fracture gap up to 7mm. A special design of the compression hole enables the use of a locking screw, which locks automatically after the full distance of compression has been achieved. Indentations on the […]
Distal Ulna Locking Plate
The Distal Ulna Locking Plate is a plate system which can be implanted with locking screws and adjusted to the contour of the distal ulna.   The plate is concealed by the muscles due to its palmar location. Therefore, metal removal is not always necessary.   The ulnar head is stabilized using locking screws. The […]
Prolock Radius Locking Plate 2.0
The development of the PROlock Radius Locking Plate 2.0 is based on the excellent results of the previous ITS Distal Radius Plates.   Minimization of flexor tendon irritation due to the anatomical plate design and rounded edges.   Precise and rapid screw placement of the distal plate holes with predefined angles using the radiolucent drill […]
Straight Locking Plate System
ITS provides various Straight Locking Plates with different plate strengths and lengths covering a wide range of indications for shaft fractures.   Properties of the implant: Multi-directional Locking Anatomical plate design Accurate fitting of the plate on the bone Plate lengths, 1.5mm: 4, 5, 6, 7, 8, 9-hole Plate lengths, 2.0mm: 4, 5, 6, 7, […]
Pelvis
Pelvic Reconstruction System
The Pelvic Reconstruction System is a proven osteosynthesis system for various fractures of the pelvis.   Properties of the implant: Multi-directional Locking Can be anatomically shaped (with bending pliers and setting instruments) Curved plate in 2 different degrees R88 & R108 Bending templates (to avoid repeated in situ attachment and readjustment) Plate profile of the […]
Revolution X Pelvic PRS RX System
The Revolution X Pelvic Reconstruction System is a proven osteosynthesis system for different fractures of the pelvis.   The special plate types cover an extended range of indications for fracture treatment of the acetabulum and the quadrilateral surface.   Properties of the implant: Multi-directional Locking Can be anatomically shaped with bending irons Plate thickness: 2.5mm […]
Sacral Rods
The operative management of pelvic ring disruptions has always represented a challenge to the surgeon. Threaded rods as fixators of posterior pelvic ring instability have been well proven for a long time, especially for sacral fractures in all three zones, and for detachments of the SI joint. The stability of sacral rods has been proved […]
LOWER LIMB
Distal Femur Locking Plate
The LRS System – Locking Reconstruction System – enables the medical treatment of fractures in the joint area with an optional less invasive method. The system provides the opportunity to operate with or without a drill block in the joint area.   Properties of the implant: Multi-directional Locking Anatomical plate design Left/right version Plate lengths: […]
High Tibia Osteotomy
The locking Tibia Head Plate is anatomically pre-shaped and is fixed laterally. The pre-shaping leads to reduced operation time since an intraoperative anatomical contouring no longer needs to be performed.   All holes are occupied with locking screws, thus ensuring an early ability to bear weight without any loss of correction.   Properties of the […]
Proximal Lateral Tibia Locking Plate
The newly developed LRS System – Locking Reconstruction System – enables the medical treatment of fractures in the joint area with an optional less invasive method.   The system provides the opportunity to operate with or without a drill block in the joint area.   Properties of the implant: Multi-directional locking Anatomical plate design Version […]
Distal Anterolateral Tibia Locking Plate
Distal Anterolateral Tibia Locking Plate is a tried and tested osteosynthesis system for various distal tibia fractures.   Properties of the implant: Multi-directional locking Anatomically shaped Torsion of the plate shaft has been adapted to that of the distal tibia 4 distal plate holes for fixation close to joint Long-hole for optimal positioning and alignment […]
Pilon Locking Plates System
Pilon Locking Plate is a proven osteosynthesis system for various fractures of the pilon.   Properties of the implant: Multi-directional Locking Anatomically shaped Pointed proximal plate end for percutaneous insertion 5 distal plate holes for optimal fixation close to joint Lengths: 4, 6, 8 and 10-hole Plate Thickness: 2.5mm (4.0mm for the 10 hole)   […]
Fibula Locking Plate
The Fibula Locking Plate is a proven osteosynthesis system for various distal fibula fractures.   Properties of the implant: Multi-directional Locking Anatomically shaped Oblong-hole for optimal positioning and alignment of the fibula length Pointed proximal plate end for percutaneous insertion Left/right version Plate lengths: 4, 6, 8, 10, 12-hole   Indications: Dislocated ankle-fractures group B+C […]
PROlock Fibula Locking Plate
The PROlock Fibula Locking Plate is a proven osteosynthesis system for various fractures of the distal fibula.   Properties of the implant: Multi-directional Locking Anatomical plate design Ideal positioning due to oblong hole Left/right version Plate lengths: 4, 6, 8 and 10-hole   Indications: Dislocated ankle-fractures group B+C according to Weber (with or without comminuted […]
Calcaneus Locking Plate
The Locking Calcaneus Plate is a tried and tested osteosynthesis system for various calcaneus fractures.   Properties of the implant: Multi-directional locking Anatomically plate design Short and long version Low Profile   Indications: Complex fractures of the calcaneus All intra-articular fractures with relevant joint distortion and a comminution zone in which a semi-operative procedure (screws, […]
SCREW SYSTEM
Cannulated Screws
ITS. GmbH provides various cannulated screw types with different diameters and lengths covering a wide range of indications for fracture treatment in trauma surgery. Low-profile screw heads with small diameters help minimize soft tissue irritation and are suitable for minimally invasive methods.   Properties of the implant: Self-drilling & self-tapping Cannulated for minimal invasive treatment […]
FOOT PLATES
Click-Off Screws
The Twin Click-off Screws are designed for application in forefoot surgery.   Design and Function: The Twin compression screws have a thread at the screw head and a thread at the tip of the screw. The thread at the head has a larger diameter and a smaller pitch, than on the screw tip. When the […]
Pedus Osteotomy Plate
The Marquardt PEDUS sets are the complete solution for the treatment of any Front / Middle or Rear foot disorders.   All implants are manufactured from Titanium Alloy according to European standards. The system has been designed to take advantage of the many benefits of fixed angle locked screw fixation.   All plates in the […]
Pedus Lapidus Plate
The Marquardt L-plate Locked Plate offers an innovative, stable method of fixation for fusion of the 1st tarsometatarsal (TMT) joint.   Advantages of Lapidus Procedure are: Extremely stable locked-screw fixation. The stepped design of the plates allows accurate planarization of the metatarsal to counter shortening. Low profile, anatomically contoured plate minimizes soft tissue irritation. Pre-determined […]